By now, thanks to our lesson on circuit analysis and previous Crash Course Physics episodes you know your way around a basic You've learned how to simplify circuits with resistors connected in series and parallel with a single battery source, But a lot of the real-world circuits that you encounter and will have to describe are much more complicated.
For example, what happens when there are multiple batteries, connected in parallel?
And what happens when we add capacitors into the mix, with resistors in our DC circuits?
On this, our last go-round inside a DC circuit, we'll encounter junctions, loops, and capacitors!
[Theme Music] Circuits aren't always just a battery powering a set of resistors.
The design of a circuit depends on the needs of the system it operates, and we need tools to take any configuration into In the mid 19th century, a German physicist named Gustav Kirchhoff expanded on the principles of Ohm's law to Kirchhoff took laws we already knew the conservation of charge and of energy and established two rules for The first rule, which deals with conservation of charge, is something we've actually already discussed.
It's known as Kirchhoff's Junction Rule, and it states that the sum of all currents entering into a junction is Like I've been saying: What goes in must come out!
The second rule, based on the conservation of energy, is a little harder to grasp, but trust me, it works!
It's Kirchhoff's Loop Rule, and it says that the sum of all changes in potential around a loop equals zero.
So, why would you need to know that's a thing?
Well, remember, batteries supply potential, and then that potential, also called voltage, drops across resistors.
It's kind of like a ride on a roller coaster.
You may climb up steep slopes and fly around the track, doing loop-da-loops to your heart's content and your stomach's Likewise, in a circuit, every battery is like a climb in height, gaining potential, and each resistor is a drop.
But no matter which way you go in the circuit, you'll always end up where you started.
So let's put these rules to the test.
Here's a circuit that wouldn't be easy to solve with only Ohm's law.
It has two batteries and four resistors, with a combination of series and parallel connections.
You can simplify the two resistors in series down to one, but after that, how do you tackle the rest?
If you want to find the current through each branch, and the voltage drop across each resistor, you're gonna need The first step of using the junction rule is to label all the junctions.
Each junction is a point on a wire that's connected to two or more circuit elements.
Then, you label all the different currents in the diagram.
There are only three different wire branches, so there are three different currents in the circuit.
Kirchhoff's junction rule tells us that everything entering junction a must leave it too.
Mathematically, this means that I2 is equal to the sum of I1 and I3, since it's I2 that splits off into two branches.
Notice, by the way, that we've assigned the current directions the way we have, because they make sense with the orientation But no matter which way you orient them, in your equations, all the values will work out the same way.
If you've correctly chosen the direction of current, then their values will come out positive, like current should.
But if you've chosen the wrong direction, then the value will end up being negative!
OK, back to the action.
Let's call the equation with the current values equation one and return to it later, when we need it.
Now it's time to try out Kirchhoff's Loop Rule!
You can draw a loop around any part of the circuit where you can imagine a charged particle moving around the circuit in a To put it simply, wherever there's a loop, we can use the loop rule!
We've got one loop in the top half of the circuit, and a second loop in the bottom half, and there's actually a third It's the entire outside of the circuit!
Now you've got your loops, and you're going to use them to solve the three unknown current values.
Let's begin with loop number one.
In this loop, you have one 20 Volt battery and two resistors, a 5 Ohm and a 40 Ohm one.
You know that there's a voltage gain across the battery and a voltage drop across both resistor 2 and resistor 1.
The voltage gain across the battery is 20 Volts, but you don't know the voltage drops across the resistors.
Thanks to Ohm's law, you can substitute the voltage drop across each resistor with the current times the resistance.
Now you've got two unknowns in this equation, which we'll call equation two.
Let's set that aside as well.
Next, let's look at loop two.
In this loop, you've got two batteries and three resistors.
If you follow the direction of the loop, you see that both batteries add voltage, because the loop direction goes from Additionally, all the resistors will subtract voltage, because the loop goes in the same direction as the current.
So it's important to draw your current directions first, in order to make this clear.
Now, you want to do the same thing you did for the first loop, which is to sum up all the changes in voltage to 0.
And then you just substitute Ohm's law in for every resistor's voltage, to get terms of current and resistance.
Now you have this third equation, which we'll call equation three.
While you could go on and create an equation for the third loop, you actually don't need to, because the junction rule gives So at this point, you have the three equations you need to solve everything!
So let's first revisit equation one and replace I1 and I3 with equations two and three.
Now you have an equation entirely in terms of I2, which you can solve to find that I2 is equal to 1 Ampere.
Once you have this value, you can easily solve equations two and three by substituting in the new I2 solution.
And there you go!
If you wanted to know any of the voltage drops across the resistors, all you'd have to do is multiply the resistance in For instance, the voltage drop across resistor 2 would be the resistance, 5 Ohms, multiplied by the current passing through That's a total voltage drop of 5 Volts.
And the drop across resistor 1 in the same loop would be the resistance, 40 Ohms, times the current through the resistor, That comes out to a voltage drop of 15 Volts, which makes sense, because then the sum of each drop in the loop is equal to the And those are Kirchhoff's Laws the Junction Rule for current and the Loop Rule for voltage, with a little Ohm's law Now it's time to reintroduce our old friend, the capacitor!
In a DC circuit, a capacitor is useful for storing charge temporarily, then releasing it again later on.
But so far we've been dealing with circuits that have a constant flow of charge, or those that have reached steady With capacitors, we deal with transient conditions, or circuit responses that change with time.
From our earlier lessons, you know that the amount of charge stored in a capacitor is equal to the voltage across the And you can store this charge by connecting a capacitor in series with a battery, letting current flow from the battery into the But what happens when you connect multiple capacitors together, like we do with resistors, in series and in Well, if you have several capacitors connected in parallel, the overall capacitance of the circuit In this circuit diagram, we have three capacitors connected in parallel with a single battery.
Current will flow into the capacitors, and will stop when each capacitor holds the maximum amount of charge.
So, how can you describe the equivalent capacitance of a circuit like this?
Easy: the total amount of charge is the sum of the charges held by each individual capacitor.
And you know that the charge held by each capacitor is equal to the capacitance times the voltage across each one.
And since every point of a conductor has the same potential, and all the conductors are connected, all So, you can simplify the charge equation to say that the equivalent capacitance of the circuit is equal to the sum of Note that this is the not the same as the parallel equation for resistors!
Capacitance is unique in this way.
In fact, the convention is also reversed for capacitors connected in series, which will have a lower overall For example, if you have a circuit with three capacitors connected in series with a single battery, then the current The charge contained by each capacitor is the same, because current can't flow through the capacitors, only on either side So if one plate of the first capacitor has a positive charge, then the other plate in that first capacitor has an equal and This leads the plate of the next capacitor to have an equal and opposite positive charge, since the amount of charge in the plates, and the wire that connects them, hasn't changed.
But the nearby charged plate redistributes the charge to compensate.
This effect carries all the way through, until the last plate of the third capacitor has a negative charge equal and So you can picture the entire set of capacitors as one big equivalent capacitor.
For devices in series, the voltage drops across each element equal the voltage provided by the battery.
So to find the equivalent capacitance in this case, just substitute in the charge equation The charge contained by each capacitor is still the same, since the charge on each positive and negative plate is Therefore, you can factor out charge, and you're left with the equation for equivalent capacitance of capacitors So for series capacitors, the combined capacitance is less than the weakest individual capacitor.
And guess what.
This wraps up our review of electricity!
Now all that's left to learn about is the other side of this same force: the realm of magnetism!
Today we learned about Kirchhoff's Laws and how we can rework conservation of charge and of energy to analyze more We also discussed how capacitors function in a typical DC circuit and the ways they behave when combined in series and parallel Crash Course Physics is produced in association with PBS Digital Studios.
You can head over to their channel to check out amazing shows like Indie America, Shanx FX, and Physics Girl.
This episode of Crash Course was filmed in the Doctor Cheryl C. Kinney Crash Course Studio with the help of these amazing people and our equally amazing graphics team is Thought Cafe.